How to Build a Recessed Shower Shelf by Yourself?

A recessed shower shelf adds beauty, elegance, functionality and style of your bathroom. Building a small recessed area in your shower to store shampoos, bath gel, and soap is limited by space. The only available area where recessed shower shelves can be installed is between the framing studs. A comfortable sized recessed shower shelf is around 3-inches deep and 14-inches wide, which is the distance between the wall studs.

Let us know how to make a recessed Shower Shelf by yourself:

1. The first step is to locate the wall studs between which you are planning on building your niche shower shelf. Locate the studs with accuracy before proceeding to the next step. Vertical lines should be precisely marked next to the studs on the wall where the recessed shelf will go.

2. Drill a hole in the wall to fit your saw inside the marked box. Along the marked horizontal lines, cut through gradually until you reach the area where you encounter the vertical wall stud with the saw. Take care not to cut into the wall stud. Completely remove the existing wall covering by cutting along the vertical lines.

3. To ensure that the boards fit perfectly into the niche, it is necessary to measure between the wall studs accurately. Matching to the wall studs already in place, measure precisely and cut 2 wall stud board pieces to make they fit into the niche shelf space across the vertical wall studs.

4. Install the 2 horizontal boards to the horizontal edges. Secure the boards with the help of 2-inch long wood screws to the existing wall studs.

5. Cover the newly prepared rough frame opening with a concrete backer board measured and cut to perfection. Glue this backer with the help of a tile adhesive.

6. Use tile adhesive to install the tiles you have chosen on the surface of the backer board. Tile adhesive has to be carefully applied to the back of every single tile. Completely cover the inside of the recessed shower shelf by cutting tiles with the help of a tile saw to accommodate the edges. Leave it to dry overnight.

To install the recessed shower accessory at your home, hotel or even in marine boats, pick the best brands like Scandvik, Nuova Rade or Vetus. 

Installing High Quality Bulb in Transportation Brings Better Lighting

The foremost thing we should keep in mind while driving a vehicle or any transport is safety concern. Safety is very important to protect ourselves from any kind of unwanted event to happen like an accident. We should be very much careful and need to ensure that you are safe while driving. But what are the things that you need to do to ensure safety. Let’s find out.

Firstly, before driving a vehicle, you need to make sure that the all the parts of your vehicle are working properly. The tyre of your car is good and filled with adequate amount of air, the brakes are fine and working well, the horn is working well and so on.

Installing a high quality parts will ensure your vehicle works well even in the bad condition. For example, if you install high quality bulb in your vehicle, it will give you better lighting at night. The best quality tyre will give better performance while riding. Therefore, when some parts are not working well, replace them with better quality product. You find many companies that offer high products. The lighting products of Imtra are of high quality and you can use them too.

Lastly, your safety depends on your driving. While driving, you should keep your eyes and ears open for concentration. Make sure, you never drink and drive. Also never talk on phone while driving. And if do not know how to drive, it is better to hire a driver for yourself.

With these few tips, you can prevent yourself from the risk of any danger.

Features that Define Facet Electric Fuel Pumps

Are you considering any fuel pump? If so, then you can give a thought to the Facet fuel pumps. When it comes to the fuel pumps, there are basically two types of them. One is mechanical, which has been in use since a long time, and the other type is of an electric fuel pump. These days the electric fuel pump are being more used as they come with many advantages.

The electric fuel pumps have risen for the reason of having the feature of fuel injections. In the mechanical pumps, carburetors were used. But after the fuel injections came into being, it has been found that the fuel pressures get higher as compared to what the mechanical pumps can do. An electric pump is mostly found inside the fuel tank, which helps the fuel in the tank to be used for the purpose of cooling the pump. Finally, it ensures a higher and steady supply of fuel.

Every time these pumps are turned on, they start running. It sometimes becomes the reason of causing fire when there is leak of fuel which may be the result of any accident or malfunction. This is one of the reasons why the fuel pumps are installed within the tank. Installing it inside the tank also helps the liquid fuel not to explode. The other safety feature associated with this is that of the installation of electric control unit which can easily be programmed to shut off the pump even when the pump is in the running mode.

These features will help you to decide whether you should go for a mechanical pump or an electric pump.